This example project contains the measurement of a plastic pen of Stemmer Imaging.
|Table of Contents|
|Original Donor||Measurement System||Release Date|
|2017-06-02||Wood partly wet.exe||49.84 MB|
The example project Wood partly wet contains the measurement of a partly wet wood sample.
|Sample Description||One side of the wood sample was dunked for a few seconds into water.|
|Sample Location||Kestrel Eye|
|Date of Measurement||2015-05-15|
Inno-Spec HS Camera, RedEye 1.7
|Measurement Description||Measurement in reflection|
|Measurement Setup||Lighting: Halogen (2x400W, 2-sided), Background: black foam, tInt=30ms, Gain=low|
A simple example on the extraction of moisture from hyperspectral wood data.
Further notes of the data sets donor
Mentioned in Tutorials
Good to Know
- When downloaded execute the installer. The data will get installed in the examples folder of your Perception Park folder in your user folder (e.g. my documents).
- When installed, open this project from the Start perspective of the Perception Studio program.
- A demo version of the Perception Studio program is available from here.
You are welcome to add your example data to the download space - see How to add example data to the Perception Wiki
© 2016 by Perception Park GmbH
The content of this page and any attached files are confidential and intended solely for the addressee(s). Any publication, transmission or other use of the information by a person or entity other than the intended addressee is prohibited. If you receive this in error please contact Perception Park and delete copied material. Perception Park GmbH, Nikolaiplatz 4 / 3, A-8020 Wartingergasse 42, 8010 Graz; Austria; FN 400381x