#
Page tree

Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

  • Observer Function: simulated angle of view
  • Illuminant Function: type of simulated lighting conditions
  • Color Format: the color format of the output image. Note, that only sRGB will produce visually matching colors. 

 

 

Observer Function

 

...

 

Panel
borderborderStyletruedashed

Cite Wikipedia: https://en.wikipedia.org/wiki/CIE_1931_color_space#CIE_standard_observer

Due to the distribution of cones in the eye, the tristimulus values depend on the observer's field of view. To eliminate this variable, the CIE defined a color-mapping function called the standard (colorimetric) observer, to represent an average human's chromatic response within a 2° arc inside the fovea. This angle was chosen owing to the belief that the color-sensitive cones resided within a 2° arc of the fovea. Thus the CIE 1931 Standard Observer function is also known as the CIE 1931 2° Standard Observer. A more modern but less-used alternative is the CIE 1964 10° Standard Observer, which is derived from the work of Stiles and Burch, and Speranskaya.

For the 10° experiments, the observers were instructed to ignore the central 2° spot. The 1964 Supplementary Standard Observer function is recommended when dealing with more than about a 4° field of view. Both standard observer functions are discretized at 5 nm wavelength intervals from 380 nm to 780 nm and distributed by the CIE. All corresponding values have been calculated from experimentally obtained data using interpolation. The standard observer is characterized by three color matching functions.

...

 

Illuminant Function

The illuminant defines the standardized lightsource, which was used when recording the data. This means, the lightsource has to fit the selected illuminant to produce correct results.

...