Perception Park software supports the usage use of Silicon Software framegrabbers to be used with Camera Link cameras. However, the installation of Silicon Software drivers and software has do be done correctly to get it to work. This article goes through the installation process.
It is highly recommended to unsinstall uninstall all prevoius previous Silicon Software products from the machine. When doing so, the uninstall process might sys say that not all files could be removed. In this case you can delete the left leftover files manually by going to "C:\Program Files\SiliconSoftware\" and "C:\ProgramData\SiliconSoftware\" and delete everything that is left inside those folders.
Download the correct installer
Perception Park software supports the Silicon Software Framegrabber "microEnable 5 marathon deepVCL". Go to it's product page (https://dev.silicon-software.softwareinfo/product/microenable-5-marathon-deepvcl/) abd and go to "Downloads". Here open up "Complete Installations" and search for "RuntimeSetup v5.5.1 (Win64) with Applets" for x64 systems or "RuntimeSetup v5.5.1 (Win32) with Applets" for x86 systems and download the installer. Once downloaded start the installer.
Installing Silicon Software
When running the installer you will be asked which features to install. The following images show which features are needed to be checked.
Note that the "Core Libraries" are not needed and can be skipped in case there are any problems with the camera connection.
Then click next until installation process starts ad wait until it has finished.
After installation, the Silicon Software applet "Acq_DualBaseAreaGray" has to be enabled for the framegrabber, otherwise it will not work. To do this, open up Silicon Software's microDisplay and go to File→Load Applet.
Now, if you go to the installed software in your Windows control panel, it should list the following items.
Now the device is ready to be used.