#
Page tree
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 18 Next »

This page summarizes possibilities on applying chemometric models from 3rd party software onto hyperspectral data for off-line or in-line purposes.


Chemometric modelling is a very essential step when investigating chemical or physical material properties. Typically, experts like to do this in their familiar software environment.
This is supported by the export of data (spectra, cubes) and import of models back into the Perception Studio software program. When configuring the real-time processing core (Perception Core) through the Perception Studio, a data processing system is obtained, allowing multiple predictions per spatial object pixel in industrial real-time.

Introduction

Data Processing Steps

When doing predictions in the industrial environment, a number of data processing steps must be considered:

  • Sensor Data Preprocessing
  • Hyperspectral Preprocessing
  • Feature Extraction
  • Feature Operation

The sensor data preprocessing aims for a "standardization" of the instrument.
Therefore electrically and optically disorder (like sensor noise, optically distortions, etc.) are corrected by this data processing step. Data from different instruments (same type but different batch) ought to get comparable to each other.

The hyperspectral preprocessing aims for a type of spectra best suited for further investigation, like analysis.

The feature extraction aims the extraction of a certain value out from spectroscopic data. This value can be the prediction value obtained by applying a linear model onto spectral data. Since this step is typically done in parallel, per spatial object pixel multiple predictions can be obtained simultaneously.

Sometimes also feature operation is an important step. By feature operation a number of features (output of the feature extraction), like predictions, are mathematically combined with each other.

Prerequisites

Applying models from 3rd party software is possible without any restrictions, when

  • the modelling process was done on spectra preprocessed by the Studio program
  • the model is linear (Y=B*X+B0)
  • and the model file (exported from the 3rd party software) is readable by the Perception Studio program.

Preprocessed means: sensor data preprocessing as well as hyperspectral preprocessing was applied to the spectra using the Perception Studio program (not the 3rd party software).
A linear model is described by the vector B and the scalar B0. X is a matrix of spectra (input) and Y is a vector of predictors (output).

Workflow

The typically workflow on getting and applying a linear model is:

In case of real-time processing:

 


© 2019 by Perception Park GmbH
The content of this page and any attached files are confidential and intended solely for the addressee(s). Any publication, transmission or other use of the information by a person or entity other than the intended addressee is prohibited. If you receive this in error please contact Perception Park and delete copied material. Perception Park GmbH, Wartingergasse 42, A-8010 Graz; Austria; FN 400381x

  • No labels